A BR Standard Class 4 Tender Engine PART 7

Continued from p.622 M.E.4755 November 1 I think we will get on with the pony truck now, before you lose interest (figs 20 to 26)! I have shown all the photographs I took whilst building my own 4MT and that truck is identical to the one on the 76. I have obviously illustrated all the drawings. All of the castings should be available from The Steam Workshop. Beginning with the laser cut ‘A’ frame, we will first have a look at that. You may be able to buy one of those from the same place. There should be holes in it for the tie bars to the stays. Before you go too much further you will need to do a little ‘brazing’ (I use this expression to save writing silver…

You're reading a preview of

Model Engineer (Digital) - 1 Issue, Issue 4756

DiscountMags is a licensed distributor (not a publisher) of the above content and Publication through Zinio LLC. Accordingly, we have no editorial control over the Publications. Any opinions, advice, statements, services, offers or other information or content expressed or made available by third parties, including those made in Publications offered on our website, are those of the respective author(s) or publisher(s) and not of DiscountMags. DiscountMags does not guarantee the accuracy, completeness, truthfulness, or usefulness of all or any portion of any publication or any services or offers made by third parties, nor will we be liable for any loss or damage caused by your reliance on information contained in any Publication, or your use of services offered, or your acceptance of any offers made through the Service or the Publications. For content removal requests, please contact Zinio.