HOW I REPLACED A LEAKING DINGHY VALVE

It wasn’t a simple process, but I was able to figure it out and save some money—and my RIB.

ROGER HUGHES

DIY PROJECTS My old Caribe Hypalon RIB dinghy had started to deflate, so I used a soapy-water spray to test for leaks. The forward-chamber air valve was leaking—not around the perimeter, where they normally do, but instead from inside the valve, indicating that it was not making an airtight seal. I tried to clean the inside with a cotton ball and liquid soap, and that did reduce the bubbles a little, but not entirely. I also fitted a second sealing washer on the valve cap and squeezed it tight up to the valve face, but the boat still deflated over a few days. “You’ve got to replace the valve,” someone told me. It was not what I wanted to hear, but off I went. I bought a Halkey-Roberts air valve…

You're reading a preview of

Cruising World (Digital) - 1 Issue, November/December 2023

DiscountMags is a licensed distributor (not a publisher) of the above content and Publication through Zinio LLC. Accordingly, we have no editorial control over the Publications. Any opinions, advice, statements, services, offers or other information or content expressed or made available by third parties, including those made in Publications offered on our website, are those of the respective author(s) or publisher(s) and not of DiscountMags. DiscountMags does not guarantee the accuracy, completeness, truthfulness, or usefulness of all or any portion of any publication or any services or offers made by third parties, nor will we be liable for any loss or damage caused by your reliance on information contained in any Publication, or your use of services offered, or your acceptance of any offers made through the Service or the Publications. For content removal requests, please contact Zinio.