"The XTO 450 allows boaters to enjoy the convenience and ease of operation associated with the XTO line, in addition to more torque and power," says Ben Speciale, president of the Yamaha US Marine Business Unit.
The 450 will gradually replace the 425 version in Yamaha's stable of outboards but features the same 5.6-liter and big-block powerhead mounting-bolt pattern as the original XTO V-8, so it is a relatively easy retrofit. The 450 is designed to move big, heavy saltwater fishing boats like the Jupiter 40 center-console with which I tested the 450s for the first time in a triple-engine setup. More on this later.
The extra 25 ponies are delivered in part thanks to an increase in intake and exhaust volume. "But this is not just a juiced-up 425," says David Meeler, Yamaha's manager of product introduction. It includes a number of other new refinements and improvements. One of the most notable is the sound level. The XTO 425 was known for being a bit on the loud side, but Yamaha toned down the operating noise associated with the 425 by incorporating an intake silencer on the 450, according to the outboard brand. It also worked to make the shifting noticeably smoother in the 450 than in the 425.
[https://cdn.magzter.com/1498743624/1682324473/articles/o7iuMU84y1682418481705/6921555531.jpg]
In addition, the Yamaha XTO Offshore 450 boasts more charging power, featuring a three-phase, simultaneous charging system. Using Phase Angle Control (PAC) components to create a superstrong magnetic field, the XTO Offshore 450 produces up to 96 net amps per engine in neutral. This enables it to provide more power for high-demand devices, such as gyrostabilizers, air conditioning and sound systems. The charging system is so powerful that it can even eliminate the need for an onboard generator, according to Yamaha. The system also prioritizes charging to the starting batteries, keeping them charged and ready for action at all times.
The upgraded XTO outboard also features Yamaha's TotalTilt feature for faster, easier engine tilting. When enabled, it allows complete tilt-up from any position with a simple double push of the "up" trim/tilt button, or full tilt-down (until trim ram contact) with a double push of the "down" trim/tilt button. A warning horn sounds just before and during these operations. Movement of the engine tilt/trim and the horn can be stopped anywhere in between by pressing the trim/tilt button again.
New raised chrome graphics on the sides, a restyled panel in back, a new flush-mounted manual flush connection in front, and hidden external wiring near the bracket add to the premium look of this powerful outboard. There's also an optional built-in propeller warning light on the bac...